欢迎来到-山阳之窗!
网站活动:
每日歌曲 :
当前位置: 首页 > MIDI信息 > 硬件 >

Doepfer - A-174-4

时间:2020-01-19 10:08来源:Midifan 作者:musiXboy 点击:
  • Doepfer - A-174-4
  • 产品信息

    最后更新 购买信息
     暂无购买信息

    产品详情

    A-174-4是一个控制器摇杆的eurorack模块,可输出XY摇杆输出的三个CV信号和一个gate信号。摇杆的XY位置决定了XY两个输出电压,而第三个输出的电压Z则是摇杆的旋转。Gate信号则由摇杆旁边的按钮来控制输出。

    每个输出的信号还可以调节偏移量(-X+XO, -Y+YO, -Z+ZO),


    For each control voltage the non-inverted signal (X, Y, Z) as well as the inverted signal with adjustable offset (-X+XO, -Y+YO, -Z+ZO) are available. The generic joystick control voltages are bipolar, i.e. they range from typ. -5V (lowest position) via 0V (center position) to  typ. +5V (highest position). The "Overlap" switches can be used to add a fixed offset voltage of typ. +5V to the non-inverting output in question so that the output voltage range changes to typ. 0...+10V (rather than -5...+5V). Thats necessary if e.g. a VCA has to be controlled, which requires a pure positive control voltage range. The switches are named "overlap" because they allow the overlapping of the non-inverting CV output (X, Y, Z) with the inverting output (-X+XO, -Y+YO, -Z+ZO) for crossfading applications. With the overlap switch "on" and appropriate setting of the offset control its possible to obtain a control voltage range of 0...+10V for the non-inverting output and +10V...0V (i.e. same range but opposite direction) for the inverting output.
    The offset voltages which are added to the inverting outputs can be adjusted by means of three small potentiometers. That way different kinds of control voltage ranges are possible, e.g.

    -5V ... +5V for the non-inverting output and +5V ... -5V for the inverting output ( Overlap = off, Offset = 0)
    0 ... +10V  for the non-inverting output and +10V ... 0V for the inverting output ( Overlap = on, Offset = max)
    -5V ... +5V for the non-inverting output and +10V ... 0V for the inverting output ( Overlap = off, Offset = max)
    0 ... +10V for the non-inverting output and +5V ... -5V for the inverting output ( Overlap = on, Offset = 0)
    On top of this the four quadrant voltages Q1, Q2, Q3 and Q4 are available. A quadrant voltage becomes positive when the joystick is positioned in the quadrant in question.

    Each CV output is equipped with an LED that displays the present voltage.

    Release date: spring 2020 (without obligation)
    (责任编辑:admin)
    数据统计中,请稍等!
    顶一下
    (0)
    0%
    踩一下
    (0)
    0%
    ------分隔线----------------------------
                  
    • 听听小编为您选的歌曲吧